Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket
Posted on September 15, 2022 | By admin
This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water Solution. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. 1 x 1.5HP Dual voltage Swimming Pool Pump. 2 x 1-1/2NPT Connectors. UL Certification for motor, longer lasting than those without certification. High performance, energy saving motor with stainless steel shaft could stand wear and tear. High efficiency, low maintenance and reliability. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “viphomesupply” and is located in this country: US. This item can be shipped to United States.
- Amperage: 10.8/5.4A
- Certification: CSA and ETL
- I.CL.: 155(F)
- Qmax: 410 L/min
- Item Width: 9.6\
- Hmax: 15.5 Meter
- Horsepower: 1.5HP
- Pumping Speed: 390-260L/MIN
- Item Length: 22.4\
- Amper: 10.8/5.4A
- Motor Shaft Material: Stainless Steel
- Speed: 3450 r/min
- Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
- Rated Power: 1100W/1.5HP
- Max Water Temperature: 50℃
- Pump Housing Material: PPGF30 + PC (anti-Oxident)
- RPM: 3450/min
- Power Cord: 59\
- Pool Type: In Ground &Above Ground
- Warranty: Lifetime
- Color: Black
- Energy Star: A+++
- CAP: 124-148 μF
- Frequency: 60HZ
- Max. Flow: 6500 GPH
- Internal Thread diameter: NPT 1.5\
- External Thread diameter: G2.25\
- Set Includes: Full Instructions, 1-1/2NPT Connectorsx2, Swimming Pool Pump
- Manufacturer Warranty: Lifetime
- Power Source: Battery, Corded
- Item Height: 11.4 in
- Brand: Not Found
- Maximum Flow Rate: 1500 GPH
- Minimum Pump Power Requirement: 1.5hp
- Voltage: 220 V
- Water Type: All Water Types
- Features: Portable, Two-Speed, Single-Speed, Easy Installation, Variable Speed
- Installation: Universal Installation
- Material: ABS, Stainless Steel, Copper, PVC, Steel
- Type: Pool Pump
- Recommended Flow Rate: 1500 GPH
- Model: Swimming Pool Pump
- Power: 1100 W
- Item Weight: 26 lb
- UPC: 283961330595
- MPN: 4AZY8007
- Suitable For: Above Ground Pools